ESD PETG
29750 Ft Bruttó
- Conductive material based on PETG
- Protects against electronic discharges
- Suitable for electronic casings
ESD-PETG is a conductive filament based on our PETG that protects against electrostatic discharges. This is very useful when printing parts that come in contact with sensitive electronics, which could be damaged by static electricity.
ESD-PETG comes with almost the same material properties as our regular PETG. It has high wear and chemical resistance, high UV-resistance and medium hygroscopic properties, which means it is moderately sensitive to moisture and needs drying if exposed to normal room humidity for an extended period of time.
Typical applications include: HDD components, casings, connectors, jigs, wafer handling and conveying.
Target resistivity is 10^6-10^9Ohm-cm.
For additional printing advice, check out our cheat sheets for recommended slicer settings in Cura, Simplify 3D and PrusaSlicer.
Our ESD-PETG, together with all our other filaments, are made in Sweden and have a diameter tolerance of ±0.025mm.
Add North’s ESD-PETG is available in 1.75mm and 2.85mm diameter with spool sizes up to 750g.
Specifications
Diameter tolerance
±0.025mm
Spool size
140 x 54 x 44 mm (100 - 250 g)
200 x 52 x 55 mm (500 - 1000 g)
200 x 52 x 66 mm (1000 g Economy lines)
300 x 52 x 102 mm (1500 - 2300 g)
350 x 52 x 100 mm (5000g)
Weight filament
750g
Weight empty spool
110 g (100 - 250 g)
215 g (500 - 1000 g)
235 g (1000 g Economy lines)
545 g (1500 - 2300 g)
785 g (5000g)
UV resistance
High
Recyclable
Yes
No BPH
Yes
Chemical resistance
High
Hygroscopy
Medium
Print temperature
255-270 °C
Working temperature
75°C
Wear resistance
High
Density
1.3
Silicone free
Yes
Bed temperature
80-85 °C
ROHS
Yes
REACH
Yes
További információk
| Tömeg | N/A |
|---|---|
| Méretek | N/A |
| Szín | Fekete |
| Súly | 750 gramm |
| Átmérő | 1,75mm, 2,85mm |
Csak bejelentkezett és a terméket már megvásárolt felhasználók írhatnak véleményt.
Értékelések
Még nincsenek értékelések.