AddNorth rABS
11550 Ft Bruttó
- 100% recycled ABS from industrial parts
- Same mechanical properties as virgin ABS
- High printability and nice surface finish
This 100% recycled ABS from industrial parts has the same fine mechanical properties as virgin ABS, with excellent inter-layer adhesion, high printability and a nice surface finish.
rABS is excellent for printing functional and tough parts, thanks to high wear and impact resistance with a working temperature of up to 100°C.
Relative to other ABS materials it has very good bed adhesion and minimal warping. rABS is also treatable with acetone for a complete smoothing of the surface layers.
For additional printing advice, check out our cheat sheets for recommended slicer settings in Cura, Simplify 3D and PrusaSlicer.
rABS together with all our other filaments, are made in Sweden and have a diameter tolerance of ±0.025mm.
rABS is available in 750g spool sizes in 1.75mm and 2.85mm diameter.
SPECIFICATIONS
Diameter tolerance
±0.025mm
Spool size
140 x 54 x 44 mm (100 - 250 g)
200 x 52 x 55 mm (500 - 1000 g)
200 x 52 x 66 mm (1000 g Economy lines)
300 x 52 x 102 mm (1500 - 2300 g)
350 x 52 x 100 mm (5000g)
Weight filament
750g
Weight empty spool
110 g (100 - 250 g)
215 g (500 - 1000 g)
235 g (1000 g Economy lines)
545 g (1500 - 2300 g)
785 g (5000g)
Chemical resistance
Low
Recycled
Yes
Working temperature
100°C
Print temperature
230-260°C
Wear resistance
High
UV resistance
Medium
ROHS
Yes
Recyclable
Yes
Bed temperature
100-110°C
REACH
Yes
Silicone free
Yes
Density
1.03-1.05
Hygroscopy
Low
További információk
| Tömeg | N/A |
|---|---|
| Méretek | N/A |
| Szín | Fekete |
| Súly | 750 gramm |
| Átmérő | 1,75mm, 2,85mm |
| Diameter tolerance | ±0.025mm |
Csak bejelentkezett és a terméket már megvásárolt felhasználók írhatnak véleményt.
Értékelések
Még nincsenek értékelések.